FREEstanding™ Room Dividers Demo
Imagine… FREEstanding™ Room Dividers where you need them… anytime you need them… and they set up in just seconds. Choose from six heights: 4'0", 5'-0", 6'-0", 6'-8", 7'-4", 8'-0", and lengths from 5'9" to 24'-1". Multiple FREEstanding™ room dividers can be locked together to form unlimited lengths.
|
Click on a feature below for more information |
Each of the 4 corner casters are self leveling, locking, non marking, have a combined load limit of 600 lbs., and use ball bearing technology. All of these combined features mean your Screenflex FREEstanding Room Dividers will glide effortlessly across the floor.
The stability of any piece of equipment comes from its base. The wider the base, the more stable the equipment. Screenflex not only has the widest end frame in the industry, but the unique design allows you to see where you are going when moving the room divider. The 14 gauge steel frame has a "powder coated" finish which is scratch resistant and several times denser than the standard finishes.
There is no floor that is perfectly level. None. Knowing this, the Screenflex engineers have equipped all FREEstanding™ and WALLmount™ units with self leveling casters. These casters "read" the dips and rises in the floor much like the shock absorbers in your car… ensuring safe and stable operation. The casters are made of "non marking" rubber and feature ball bearing technology. All of these innovations combined mean your Screenflex Room Divider will glide effortlessly across the floor.
Full length anodized hinges are connected to the panels every 4 inches with screws creating both superior strength, stability, and flexibility throughout the entire room divider. The full length hinges in our 8 ft. tall, 13 panel room dividers, use 550 screws to connect those panels to each other. AMAZING!! Since there are absolutely NO gaps between the panels, it is impossible to get your hand or fingers stuck between the panels.
Each FREEstanding™ Room Divider is equipped with two custom made injection molded storage latches which secure the units in a closed position. A simple flick of the latch with your fingers opens your unit… no need to kick it to get it to work.
Screenflex FREEstanding™ units are designed with versatility in mind. The sleek design means that each FREEstanding™ unit can easily glide through all common 28", 30", 32", and larger doorways. Yet another important benefit 
Each panel is an efficient 22" wide ¾" thick design consisting of resin impregnated honeycomb core with 10lb. compressed fiberglass bonded to both sides. Each panel is covered with seamless fabric or vinyl laminated to the fiberglass surface using state of the art technology.
Seeing the need for a truly versatile, flexible room divider which was also portable, the architects at Screenflex designed and built the first such device in the 1980's and patented it in the early 1990's. Being the originator is great, but being the 
At Screenflex, we have combined superb engineering, innovative patented designs and unparalleled craftsmanship to bring you the finest portable room dividers ever manufactured. The core of our panels is made of 3/4 inch closed cell honeycomb and nonwoven fiberglass facing for maximum tackability and sound absorbency. This core is surrounded by a 26 gauge galvanized steel frame which adds great rigidity and superior screw holding ability. Using unique, state of the art equipment, these components are then permanently bonded with a fiberglass matt. This process enhances the panel's tackability, sound absorbency, and strength. Finally, the panel is covered with the customer's choice of a wide variety of popular fabric and vinyl coverings.
Are Screenflex products made in the U.S.A?